Building the projector is made of plastic with a brilliant (but not mirror smooth), white coating. The coating is relatively durable, but because of the chaotic arrangement of tiny sequins fingerprints, small scratches, dust and other pollution and damage to the shell is not very visible. Material narrow decorative strips on the front panel – this is also plastic, but with a dark silvery-gray coat. At the top of the lens are located closer to the wheels shift lens, closest to the center – the lamp compartment cover, and closer to the back of – the two buttons (power and source selection), two indicators of the state and the infrared receiver window, a little exciting back cover for a better review.
In standby mode, the icon on the soft power button is backlit in blue. Using the blue button is highlighted, and select the source. The other buttons – on the left side.
Interface connectors are located in a deep recess on the rear panel. In addition, the rear panel connector and put a mechanical power switch, connector for Kensington lock, and removable air filter grille.
Two skobochki in the niche of connectors are designed to fix the cables off, for example, using the plastic buckle. Warm air is blown through the iron bars on the front panel (front and right). Near the second lens is the infrared receiver. The projector is equipped with two front legs screw out of the body (with a convenient vorotkami) to address a small bias and / or slightly lift the front of the projector at its location on a horizontal surface. For attachment to the bracket at the bottom of the projector vdelany 5 threaded metal sleeves. To host the ceiling at the front was the logo in the correct orientation, it can be reversed. The lamp and air filter can be changed without removing the projector from the ceiling bracket.
The board is made of plastic with a matt-white surface. It is quite large and slightly widish, but rests comfortably in the hand. The buttons are large, they are relatively small, the signature contrast, as a result of the buttons easy to navigate, as are most necessary to the touch. There is a bright LED backlight, which includes phosphorescent button sun.
Menu strict, by default it is black and gray-white appearance, which can be replaced by alternative more interactive.
Font menu legible. Settings are many, some are located on the third level of embedding. Easy navigation, the bottom row contains a hint on the function buttons. When setting the parameters affecting the image on the screen shows a minimum of information – only a list of regimes or sliders, which facilitates the setting picture. For rapid image settings, you can use single menu containing a number of important parameters. Called by the menu button Enter / Line Menu on the main body and on the remote, and the parameters of moving up and down arrows.